Smeg Built-in Electric Hob SA435X-1 User Manual

Dear Customer,
Thank you for having purchased one of our products.
We are certain that this new, modern, functional and practical appliance, built with the very
highest quality materials, will meet your requirements in the best possible way. This appliance is
easy to use. It is, however, important to thoroughly read the instructions in this handbook in order
to obtain the best results.
These instructions are only valid for the countries of destination, the identification symbols of
which are indicated on the cover of the instruction manual and on the appliance itself.
The manufacturer shall not be held responsible for any damages to persons or property
caused by incorrect installation or use of the appliance.
The Manufacturer shall not be held responsible for any inaccuracies in this handbook due to printing or
transcription errors; the designs in the figures are purely indicative. The Manufacturer also reserves the right
to make any modifications to the products as may be considered necessary or useful, also in the interests
of the user, without jeopardizing the main functional and safety features of the products themselves.
COD. 01101SM - 22.04.2004
INSTRUCTIONS AND ADVICE FOR THE
USE, INSTALLATION AND MAINTENANCE
OF OUR BUILT-IN ELECTRIC HOB
SMEG S.p.A.
Via Circonvallazione Nord, 36
42016 GUASTALLA - ITALIA
TIPO: PAZ04
MOD.: SA435X - 1

Smeg Built-in Electric Hob SA435X-1 Specifications

General

Brand	Smeg
Model	Built-in Electric Hob SA435X-1
Category	Hob
Language	English

Summary

Description of Hot Plates

Use of Electric Plates

Switching On Electric Plates

Instructions on how to turn on the electric hob plates using the switches.

Using Electric Plates for Cooking

Guide on regulating heat intensity for different cooking processes.

General Use Warnings and Hotplate Care

Hotplate Preservation Advice

Advice on correctly preserving the hotplate surface to maintain its appearance and prevent rust.

Cleaning the Hob

Hotplate Cleaning Procedure

Steps for periodic washing of the hotplate with soapy water and drying.

Installation Instructions

Installing the Hob

Guidance on installation in accordance with local regulations and cabinet requirements.

Fixing the Hob to the Cabinet

Instructions for applying the seal and securing the hob into the cabinet.

Barrier Installation Requirements

Caution and requirements for installing a rigid barrier due to potential underside surface heat.

Electrical Connection

Requirements for electrical connection to the mains supply, complying with local regulations.

Conversions

Changing the Type of Power Supply

Instructions for converting the appliance to a three-phase system from a single-phase setup.

Servicing and Technical Characteristics

Replacing Electrical Components

Procedure for accessing and replacing electrical components, including cable substitution notes.

Technical Characteristics of Components

Scheme detailing the power ratings of electrical components and power cable specifications.

Technical Data