Use
61
EN
4. After 10 seconds, the timer will start the
new countdown or will be deactivated.
Recall Function
If the appliance is switched off
unintentionally, carry out the following
procedure within 6 seconds:
1. Switch on the appliance.
• The button starts to flash.
2. Press the pause button immediately
to restore the functions that were
previously active.
3.6 User menu
The user menu allows you to modify the
operating characteristics of the appliance.
7 of the options can be modified. Each
option is indicated on the display with the
letter “U”, which alternates with a
progressive number.
User menu options table
Accessing the user menu
1. If the hob is off, switch it on using the
On/Off button .
2. Press again within 3 seconds to
switch it off; the button starts to flash.
3. Press and hold .
4. Press and hold in the cooking zones
setting area to display the symbols to
press in sequence to access the menu
options.
An independent timer can be set
during timed cooking.
This is used to restore some
functions that have already been
started after the appliance has
been switched off unintentionally.
This function restores the cooking
zones, timer and rapid heating
functions; no other functions will be
restored.
Option Description
U0
Maximum total power (kW) - Change
by the installer only
U1
Option not selectable
U2
Button volume
U3
Buzzer volume
U4
Display brightness
U5
Timer animation
U6
Automatic pan detection
U7
Timer alarm duration
To Next Page
Loading...
