How to fix a Smeg Washer that won't start?
If your Smeg Washer programme isn't starting, ensure the appliance is properly connected to the electrical mains and receiving power. Also, check that the water tap is turned on and the washer door is completely closed.
Why is my Smeg Washer not cleaning properly?
If your Smeg Washer isn't cleaning items properly, make sure you're using the correct amount of detergent and that there's regenerating salt in the tank. Ensure the instruments are positioned correctly, and the selected program is suitable for the type and amount of dirt. Check that all filters are clean, correctly fitted, and that the spray arm water outlet holes are not clogged. Finally, confirm that nothing is obstructing the spray arms from turning and that the salt tank cap is firmly closed.
What to do if water stagnates in my Smeg Washer?
If water is stagnating in your Smeg Washer, make sure there are no tight bends in the drain hose. Also, check that the drain trap and the appliance filters are not clogged.
Why are my dishes not drying in my Smeg Washer?
If the items in your Smeg Washer aren't drying properly or appear dull, verify the absolute filter condition by checking the operating hours as an appliance parameter. Ensure there is neutralising agent in the container, and the dispenser is set correctly. Confirm that the detergent is of good quality and hasn't lost its effectiveness. Finally, check that the salt tank cap is firmly closed.
Why is there rust in my Smeg Washer?
If you see visible traces of rust in the chamber of your Smeg Washer, it's likely due to external factors since the chamber is made of corrosion-proof steel. You can use commercially available products specifically designed for removing these stains. Also, ensure that the detergent doses are correct and the salt tank cap is firmly closed.
What to do if my Smeg Washer printer is not working?
To troubleshoot an optional printer that isn't working with your Smeg Washer, first check that the accessory is fitted with suitable thermal paper. Next, ensure that the device is connected properly to both the electricity supply and the data connection. If you have a WD4190 model, verify that the data output switch (next to the on-off switch) is set correctly for printer operation.
Defines the purpose and application of the WD series washers.
Defines the role and responsibilities of the 'Responsible Authority'.
Safety guidelines for handling the device after a cycle interruption.
Explains the function of each button and indicator LED.
Step-by-step guide to selecting and starting a washing program.
Details the drying phase, including adjustment of settings.
Procedure for logging into the setup menu using a password.
Details how alarm codes are displayed and categorized (Fatal/Non-Fatal).
Outlines default and reset procedures for dealing with alarms.
Lists specific alarm IDs, their descriptions, and user actions.
Basic troubleshooting steps for common operational issues.
Details power cable specifications and disconnection device requirements.
General| Brand | Smeg |
|---|---|
| Model | WD4190 |
| Category | Laboratory Equipment |
| Language | English |
To Next Page
