EasyManua.ls Logo

Smith-Style Coppice - Getting Started

Smith-Style Coppice
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
4
Getting Started
Carefully remove your radio from the box. You may wish to store the packaging for
future use.
What can you find inside of your package
Main unit
Instruction manual
Power adapter
Positioning your Radio
Place your radio on a flat / stable surface that is not subject to vibrations.
Avoid the following locations:
Where the radio will be exposed to direct sunlight.
Where the radio will be close to heat radiating sources.
Where the humidity is high and ventilation is poor.
Where it is dusty.
Where it is damp or there is a possibility of water dripping or splashing onto
unit.
Adjusting the Antenna
Unwind the DAB/FM antenna and screw it to Antenna socket on the back of the unit to
ensure you receive the best reception possible in both DAB and FM radio modes. It may
be necessary to adjust the position of the radio and /or antenna to achieve the best
signal.
Turning the Unit On/Off
Connect the plug at the end of power adapter cable to the DC IN socket on the back of
the unit. Then insert the power adapter into the mains socket. Press button on the unit
to turn unit on or standby. To switch the unit off completely, unplug the power adapter
from the mains socket.

Related product manuals