Smith-Style Coppice - Audio Settings; General Operation; Setting Time;Date; Setting Backlight

7
press Info/menu button for 3 seconds, press Tune – or Tune + button to select
'Scan setting', and then press Enter button to confirm.
2. Display will show 'Strong stations only', press Tune – or Tune + button to select
between 'Strong stations only' and 'All stations' then press Enter button to
confirm.
Audio Settings
By default, all stereo stations are reproduced in stereo. For weak stations, this may
result in a poor signal-to-noise ratio (hiss).
1. To play weak stations in mono, press Info/menu button for 3 seconds, press Tune –
or Tune + button to select ‘Audio setting’, and then press Enter button to confirm.
2. Press Tune – or Tune + button to select ‘Forced mono’, and then press Enter
button to confirm.
General Operation
Setting Time/Date
1. Press Info/menu button for 3 seconds at either DAB or FM mode, then press Tune –
or Tune + button to select System > Time, press Enter button to confirm.
2. Press Tune – or Tune + button to select options, and then press Enter button
to confirm the setting.
Set Time/Date
Manually set-up both Time and Date
Auto update
‘Update from any’, Update from DAB’, ‘Update from
FM’, or ‘No update’
Set 12/24 hour
12 or 24 hour format
Set date format
DD-MM-YYYY or MM-DD-YYYY
3. Then setting time according to your personal preference.
Setting Backlight
1. Press Info/menu button > System > Backlight, press Enter button to confirm.
2. Press Tune – or Tune + button to select ‘On Level' or 'Dim Level', then press Enter
button to confirm.
3. Press Tune – or Tune + button to select backlight level, and then press Enter
button to confirm the setting.