smith&nephew RENASYS EDGE - Page 7

For detailed product information,
including indications for use,
contraindications, eects,
precautions, warnings, and important
safety information, please consult
product’s Instructions for Use (IFU)
prior to use
Remove the adhesive backing panel from the
RENASYS So Port dressing, and align directly
over the hole in the transparent lm.
Use gentle pressure to anchor the So Port
tothe transparent lm.
8
Secure the RENASYS So Port to the patient according
toyour institutional protocol.
Ensure the aeration disc, located near the orange quick
click connector, is not covered or otherwise occluded
bythemethod used to secure the So Port.
10
Connect the RENASYS So Port to the canister tubing
bypushing the orange quick click connectors together.
An audible click indicates connection is secure.
Activate the RENASYS pump ensuring that it is operating
at the prescribed therapy level. Please refer to your
RENASYS pump manual for full operating instructions.
Thenished dressing should be fully compressed,
rmtothetouch and leak-free.
11
Smooth the dressing down while removing
the RENASYS So Port stabilisation frame.
9
RENASYS
◊
EDGE Quick reference guide 6