What does sr ERR mean on Smiths Medical Equipment display?
If your Smiths Medical Equipment displays 'sr ERR', it means that no sensor is attached to the oximeter, or the sensor/patient cable is defective. Attach a sensor to the oximeter. If the problem persists, try a new sensor. If the issue still continues, contact your authorized service representative.
What to do if Smiths Medical Equipment displays 27 ERR?
If your Smiths Medical Equipment monitor displays '27 ERR' when powered up, it indicates a defective battery. Disconnect and reconnect the AC power cord. If the error message persists, the battery is defective. Contact your authorized service representative.
Why is battery life so short on my Smiths Medical Equipment?
If the battery run time is excessively short on a fully charged battery in your Smiths Medical Equipment, the Li-Ion rechargeable battery pack likely needs to be replaced. Contact your authorized service representative.
Why is the USB Power indicator not lit on my Smiths Medical Equipment docking station?
If the USB Power indicator is not lit on your Smiths Medical Equipment docking station, it is proper operation when AC Power is connected. However, if AC Power is not connected, check all cable connections and confirm that the PC, USB hub, or other source of USB power is working correctly.
How to fix no printout on Smiths Medical Equipment printer?
If there is no printout on your optional Smiths Medical Equipment printer, ensure AC power is connected to the Docking Station and that there are trends in memory. Also, check if there is paper loaded correctly. Take trend data.
General| Display Type | Color LCD |
|---|---|
| SpO2 Range | 0-100% |
| Power Source | 4 AA alkaline batteries or AC adapter |
| SpHb Range | 0-25 g/dL |
| PI Range | 0.02-20% |
| PVI Range | 0-100% |
| Measurement Parameters | SpO2, Pulse Rate, SpHb, PI, PVI |
| Humidity Range | 10% to 95% non-condensing |
| Storage Temperature | -20°C to 60°C |
Information contained in this document is copyrighted by Smiths Medical PM, Inc.
Product and reusable sensors are warranted against defects in material and workmanship.
Steps to obtain warranty service, including Return Authorization number.
Indicates compliance with the Medical Device Directive 93/42/EEC.
Provides installation, operation, and maintenance instructions for health-care professionals.
Explains the meaning of various symbols used in the manual and on the device.
Lists important safety warnings for the operation and use of the oximeter.
Lists precautions to prevent damage to the device or inaccurate readings.
Provides additional important information and clarifications regarding device operation.
Specifies the intended applications, patient population, and environments for the WW1020.
Specifies the intended applications, patient population, and environments for the WW1000.
Highlights key features and capabilities of the pulse oximeter.
Explains how the pulse oximeter determines SpO2 and pulse rate using light.
Defines and explains the PI value as a measure of pulse-signal strength.
Details the components and indicators shown on the oximeter's front display.
Describes the function of the main ON/OFF key for the monitor.
Identifies connectors and compartments on the back and bottom of the monitor.
Lists the items included in the oximeter shipment.
Explains how to power the oximeter using battery or external sources.
Provides instructions for installing AA or rechargeable Lithium-Ion battery packs.
Details safety precautions and methods for connecting external power.
Describes connecting the oximeter via AC power adapter or USB interface cable.
Explains powering the oximeter using a USB source.
Instructions for powering on the monitor and performing a pre-use check.
How to access and change monitor configuration settings like language.
Guidance on using a patient simulator to check monitor performance.
Step-by-step guide for correctly attaching the oximetry sensor to a patient.
Chart to select the appropriate sensor based on patient size and site.
Procedures for cleaning and disinfecting reusable oximetry sensors.
Instructions for inspecting sensor and cable integrity before use.
Guidance on properly storing the oximetry sensor when not in use.
Information and warnings regarding the use of the device in a home environment.
Key points to cover when training a home use caregiver on device operation.
Explains how the monitor stores SpO2, pulse rate, and PI readings as trend data.
Details how the patient record number is managed and incremented.
Specifies the trend data storage capacity and record length.
Procedure to clear all trend memory and reset the patient record number.
Information on outputting trend data to a printer or PC.
Overview of the WW1025 Docking Station and its functions.
Details the indicators, power options, and connectivity of the docking station.
Information on charging and using the rechargeable battery pack with the dock.
Instructions for correctly placing the oximeter into the docking station.
Procedure for transferring data from the oximeter via the docking station.
Describes the printer interface, keys, and indicators.
Step-by-step guide for physically connecting the thermal printer to the dock.
Instructions for loading 58mm thermal paper into the printer.
Explains the different print modes: Real Time, Numeric Trend, and Graphic Trend.
Describes symbols indicating data conditions like artifact or low signal strength.
Overview of methods for sending real-time and trend data to a PC.
Identifies the ports for data transfer and power connection.
Step-by-step guide for connecting the oximeter to a PC using USB.
Instructions for connecting to a PC via RS232 port using adapter cables.
Details the typical ASCII trend data output format for PC transfer.
Lists recommended daily and periodic maintenance tasks for the oximeter.
Safe methods for cleaning and disinfecting the oximeter and accessories.
Recommendations for storing the monitor to maintain performance.
Troubleshooting common problems related to the oximeter's power supply.
Addresses issues with pulse detection, SpO2, and pulse rate readings.
Solves problems related to the optional printer and device display errors.
Lists various BCI® accessories including sensors, cables, and docking stations.
Contact details and procedures for ordering supplies and accessories.
Technical details of the oximeter's LED displays.
Descriptions of visual indicators like power and battery charge status.
Information on the available keys and user interface controls.
Detailed SpO2 range, resolution, averaging, and accuracy specifications.
Detailed pulse rate range, resolution, averaging, and accuracy specifications.
Detailed SpO2 range, resolution, averaging, and accuracy specifications.
Detailed pulse rate range, resolution, averaging, and accuracy specifications.
Technical specifications for Pulse Amplitude Index measurement.
Physical dimensions and weight of the oximeter.
Operating and storage temperature and humidity ranges for the device.
Details the device's protection against electric shock and ingress of liquids.
Guidance on electromagnetic emissions and compliance levels for the device.
Guidance on electromagnetic immunity and compliance levels for the device.
Guidelines for maintaining safe distances from RF communication equipment.
Lists cables, transducers, and accessories specified for use with the oximeter.
To Next Page