EasyManua.ls Logo

Smoothskin bare+ - Smoothskin Bare+ User Guide and Operation; Getting Started with Smoothskin Bare+; Smoothskin Bare+ Key Features

Smoothskin bare+
16 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
15
6.1 TECHNICAL
SPECIFICATIONS
SMOOTHSKIN BARE+ is a filtered broadband Intense
Pulsed Light system with the following technical
specifications:
Repetition Rate: Manually pulsed every 0.6 seconds
Continuous Operation
Max Optical Output: 4J/cm
2
Pulse Length: 1msec FWHM
Wavelength: 515-1100nm
Power Line Input: 100–240V~, 50/60Hz, 1.7-0.91A
Operating Temperature: Between 5°C and 40°C
Operating Humidity: Up to 93%R.H. non condensing
Operating Pressures: 700hPa to 1060hPa
Treatment Area (spot size): 3 cm
2
(30mm x 10mm)
Transport Conditions:
Temperature: -25°C to +70°C
Humidity: Up to 93%R.H. non condensing
Pressures: 500hPa to 1060hPa
SMOOTHSKIN BARE+ has unlimited flashes and is intended
for a single user.
CE marking certifies that this appliance conforms to the
following EEC directives:
Low Voltage Directive 2014/35/EU
Electromagnetic Compatibility Directive 2014/30/EU
Energy related Product Directive 2009 / 125 / EC.
6.0 INFORMATION
NRTL Certification marking
FCC EMC compliance
for North America
Australia Regulatory
Compliance Mark
EAC Conformity Marking
for Custom Union
Trefoil compliance mark
for Ukraine
China RoHS environmental
protection use period
Warning Optical
Radiation from device
may cause eye injury
Type BF Applied Part
Class II Equipment
Follow Instructions for use
WEEE waste disposal mark
of the European Union
European
Conformity Marking
Keep Dry
6.2 DISPOSAL (end of life)
In order to minimise hazards to health and the environment and ensure that materials can be recycled,
this product should be disposed of at a separate collection facility for waste electrical and electronic
equipment. The Wheelie Bin symbol marked on the product is there to remind you.
6.3 WARRANTY
We grant a 2 year warranty on the product starting on the date of purchase. Within the warranty period,
we will check faults in materials or workmanship free of charge and replace the complete device, at our
discretion. This warranty extends to every country where this device is supplied by Cyden Ltd or its
appointed distributor.
This warranty does not cover damage due to improper use, normal wear or use as well as defects
that have a negligible eect on the value or operation of the appliance. The warranty becomes void if
repairs are undertaken by unauthorised persons and if original SMOOTHSKIN BARE+ parts are not used.
To obtain service within the warranty period, please visit our website:
www.smoothskin.com
CONTENTS

Other manuals for Smoothskin bare+

Related product manuals