Wireless Video Scope
Snap-on 13
Transportation and Storage
1. Avoid exposing the unit to continuous vibration or extreme hot and cold temperatures.
2. Always store the wireless video scope indoors in the case it came with.
3. Always remove the batteries if the unit will not be used for an extended period of time.
Maintenance Instructions
Make sure the batteries have been removed from the unit before
performing maintenance.
The Snap-on wireless video scope has been designed to require little maintenance.
However, in order to maintain its performance, you must always follow these guidelines:
1. Always handle the device with care. It is not shock-resistant and should not be
banged or dropped. Treat it as you would any other sensitive optical device.
2. Always clean the imager head after use with mild detergent.
3. Use only isopropanol swabs to clean the connections.
4. Avoid rubbing too hard on the LCD. After use, wipe the display clean gently with a dry
cloth.
5. Do not disassemble this device beyond what is shown in the manual. Doing so will
void your warranty.
Additional Accessories
Magnet and Mirror attachments – BK5500-2
8.5 mm diameter Imager, 72 in long – BK5500-7
8.5 mm diameter Imager, 120 in long – BK5500-9
Ultra Violet Imager, 36 in long – BK5500-10
Dual View Imager, 36 in long – BK5500-12
5.5 mm diameter Imager, 36 in long – BK5500-13
Digital Video Capture Device (DVR) – BK5500-14
To Next Page
Loading...
Need help?
General
