To Next Page
V
Victoria PerezSep 12, 2025
How to fix a frozen image on my Snap-On BK8000 display?
- VvsuarezSep 12, 2025
If the image on the display of your Snap-On Security System is frozen, cycle the power to resolve a processor lockup.
How to fix a frozen image on my Snap-On BK8000 display?
If the image on the display of your Snap-On Security System is frozen, cycle the power to resolve a processor lockup.
What to do if my Snap-On Analytical Instruments unit will not switch on?
If your Snap-On Analytical Instruments unit won't switch on, it's likely because the battery is very low. Charge the unit until the green charge LED illuminates.
Why is the LCD screen black on my Snap-On Analytical Instruments?
If the LCD screen on your Snap-On Analytical Instruments is black but the Display Unit is ON, check if a USB or video out cable is inserted. Remove any cable that is plugged in.
Why will my Snap-On Analytical Instruments units not charge?
If your Snap-On Analytical Instruments units will not charge, ensure the power supply is properly connected to both the AC supply and the BK8000. Also, the battery may be too hot; allow the unit to cool down.
How to fix a Snap-On Analytical Instruments display unit that does not display an image?
If the display unit of your Snap-On Analytical Instruments isn't showing an image from the imager handle, first, make sure the imager is securely connected to the imager handle. Then, ensure the imager handle is switched on and paired with the Display Unit. If it's not paired, use the Settings Menu to pair the imager handle with the Display Unit.
What to do if the image on my Snap-On Analytical Instruments display is frozen?
If the image on the display of your Snap-On Analytical Instruments is frozen, the processor may have locked up. Try cycling the power to resolve this.
What does it mean if the charging LEDs flash red/green on my Snap-On BK8000 Security System?
If the charging LEDs on your Snap-On Security System are flashing red/green, it indicates a faulty battery.
What to do if the LED on my Snap-On BK8000 imager is ON but there's no image?
If the LED on the imager of your Snap-On Security System is on but there is no image, test with a second imager if available. If the problem persists, it may be due to a broken video signal wire.
Why is the LCD screen black on my Snap-On BK8000, but the viewer unit is ON?
If your Snap-On Security System's LCD screen is black while the viewer unit is on, check if a USB or video out cable is inserted. If so, remove the cable.
Why does my Snap-On BK8000 display unit not show an image from the imager handle?
If the display unit of your Snap-On Security System isn't showing an image from the imager handle, consider the following: * Make sure the imager is securely connected to the imager handle. * Ensure the imager handle is switched on and paired with the viewer unit. * If it's still not working, use the Settings Menu to pair the imager handle with the viewer unit.
General| Material | Steel |
|---|---|
| Lock Type | Electronic |
| Dimensions | 12.00 x 8.50 x 4.50 in |
| Weight | 7.00 lbs |
| Color | Black |
Keep work area clean, avoid flammable atmospheres, corrosive chemicals, and ensure adequate lighting.
Stay alert, use common sense, maintain footing and balance, and use appropriate safety equipment.
Safety precautions for battery charger and battery use, including AC power supply handling and warnings.
Non-user replaceable batteries, proper disposal, charging and storage temperatures, and handling damaged units.
Use as directed, avoid water immersion, handle condensation, ensure switches work, and store safely.
Precautions for live electrical charge, walls, pipes, automobiles, and general use to prevent injury.
Procedure for charging the BK8000, including LED indicators and temperature limits.
General operating instructions, including warnings about force and water resistance.
How to display images, power on the unit, and adjust LED brightness.
