Rev 07272020 Page 10 of 15
Care & Cleaning
• Unplug unit before cleaning, take all stored items out of the beverage dispenser.
• Clean the beverage dispenser with wet soft rag and neutral detergent.
• Don’t use hard brush or corrosive detergent to clean the beverage dispenser.
• Don’t wash electrical parts with water to avoid electrocution.
• The door sealing strip needs periodical cleaning. Please turn it inside out and clean it with wet soft rag.
• Dust on the condenser and compressor affect heat emanation. Please clean them up with soft brush or vacuum
cleaner.
• If the beverage dispenser is not in use, unplug the power cord, take all cans out and dry the cabinet area.
Soap & Water
Baking Soda & Water
Use 2 tbsp of baking soda in
1qt of water. Be sure to wring
excess water out of sponge or
cloth before cleaning around
controls or any electrical parts.
Wipe Gaskets with a clean soft
cloth.
Use a soft cloth to clean Can
Trails
Remove two screws to remove
the mat. Clean out water with
a soft cloth. Replace the mat
and two screws.
Soap & Water
Non-Abrasive Cleaner
Do not use commercial
household cleaners containing
ammonia, bleach, or alcohol
to clean. Do not use a dry
cloth to clean smooth doors.
To Next Page
Loading...