Snapper Pro 5901280 - Cutting Quality Troubleshooting; Cutting Pattern and Surface Issues; Specifications Overview; Engine and Transmission Specifications

Not for
Reproduction
Problem: Stepped Cutting
Stepped cutting is sharp ridges or uneven levels left in the lawn surface.
Stepped cutting is usually caused by mower deck damage or misadjustment,
or damage to the mower blades.
RemedyCause
Level the deck correctly.Deck is not leveled correctly.
Check and inflate the tires.Tires are not properly inflated.
Replace the blades.Blades are damaged.
Repair or replace the deck.Deck shell is damaged.
Repair or replace the spindle.Mower spindle is bent or loose.
Reinstall the blades correctly.Blades are installed incorrectly.
Problem: Uneven Cutting
Uneven cutting is waviness or smooth troughs in the lawn surface. Uneven
cutting is usually caused by mower deck damage or misadjustment.
RemedyCause
Level the deck correctly.Deck is not leveled correctly.
Sharpen or replace the blades.Blades are dull or worn.
Replace the blades.Blades are damaged.
Clean out the deck.Deck is clogged with grass clippings.
Repair or replace the deck.Deck shell is damaged.
Repair or replace the spindle.Mower spindle is bent or loose.
Reinstall the blades correctly.Blades are installed incorrectly.
Check and inflate the tires.Tires are not properly inflated.
Problem: Stringers
Stringers are sparse patches of uncut grass left behind the mower. Stringers
are usually caused by operator error or poor blade maintenance.
RemedyCause
Sharpen your blades.Blades are not sharp or nicked.
Replace your blades.Blades are worn down too far.
Always mow at full throttle.Engine speed is too slow.
Slow down.Ground speed is too fast.
Clean out the mower.Deck is plugged with grass.
Specifications
Specifications are correct at time of printing and are subject to
change without notice.
ENGINE
For complete engine specifications see the engine
manufacturer's operator's manual included with your unit.
Fits models: 5901280
Briggs & Stratton Commercial Turf 49T877
Briggs & StrattonMake
49T877-0010-G1Model
12 volt, 16 amp alternator; Battery: 340
cca
Electrical System
Fits models: 5901663
Briggs & Stratton Vanguard 49R977
Briggs & StrattonMake
49R977-0001-G1Model
12 volt, 16 amp alternator, Battery: 340
cca
Electrical System
Fits models: 5901664
Kawasaki FX801V
KawasakiMake
FX801VModel
12 volt, 15 amp charging coil; Battery:
340 cca
Electrical System
Fits models: 5901665
Briggs & Stratton Vanguard EFI
Briggs & StrattonMake
49E877-0009-G1Model
12 volt, 20 amp alternator, Battery: 340
cca
Electrical System
Fits models: 5901666 & 5901667
Briggs & Stratton Vanguard EFI
Briggs & StrattonMake
61E877-0005-J1Model
12 volt, 20 amp alternator, Battery: 340
cca
Electrical System
Fits models: 5901708
Briggs & Stratton Vanguard EFI
Briggs & StrattonMake
543777-2125-J1Model
50 snapperpro.com