Snapper Pro S200X Series - Regular Maintenance; Maintenance Schedule

RegularMaintenance
RegularMaintenance
MaintenanceSchedule
Thefollowing schedule should be followed for normal careof your rider and mower.You will needto keepa record of your
operating time. Determiningoperating time is easily accomplished by observing the elapsedtime recorded by the hour meter.
SafetyItems Before Every5 Every25 Every100 Every250 Spring&
EachUse Hours Hours Hours Hours Fall
CheckSafetyInterlock System
CheckRider Brakes
CheckMower BladeStopping Time
Rider Maintenance Before Every5 Every25 Every100 Every250 Spring&
EachUse Hours Hours Hours Hours Fall
CheckRider/ Mower for loose hardware
CleanDeck& Check/ ReplaceMower Blades**
Lubricate Rider & Mower **
CleanBattery& Cables
CheckTire Pressure
CheckHydraulic Oil
ChangeHydraulicOil Filter **
EngineMaintenance Before Every5 Every25 Every100 Every250 Spring&
EachUse Hours Hours Hours Hours Fall
CheckEngineOil Level
Check/ Clean Cooling Fins& Intake **
Service Air Filter *
ChangeOil & Filter *
Check/ ReplaceSpark Plugs *
Check/ ReplaceFuelFilter *
* Referto engine owner's manual. Changeoriginal engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
26 www.SnapperPro.com