Snapper 13 Series Safety Instructions & Operator's Manual

Safety Instructions & Operator’s Manual
AUTOMATIC.BLADE STOP &
SMOOTH START CLUTCH EQUIPPED
REAR ENGINE
RIDING MOWERS
SERIES 13
MODELS
250813BE
280813BE
300813BE
281013BE
301013BE
301213BE
331313BE
331413KVE
421613BVE
Thank you for buying a SNAPPER product! Before operating your mower, read this manuai carefuiiy
and pay particuiar attention to the Important Safety Instructions on page 2. Remember that mowers
and all power equipment can be dangerous if used improperly and keep in mind that safety requires
careful use in accordance with the instructions and....common sense!
This Operator's Manual covers SERIES 13 (last two numbers in the multi-digit model designation) REAR
ENGINE RIDING MOWERS. The first two digits indicate the width of cut. The next two (or three) digits give
the horsepower rating. Models having a "B" suffix are Briggs & Stratton powered., and those with a "K" are
powered by Kohler engines. A "V" suffix is used to distinguish engines equipped with overhead valves.
Models having an "E" suffix are Electric Start.
SNAPPEH
McDonough, GA., 30253 U.S.A.
MANUAL No. 3-4145 (REV. 1,12/93)

Snapper 13 Series Specifications

General

Mulching Capability	Yes
Engine	Briggs & Stratton
Cutting Width	21 inches
Drive System	Rear-wheel drive
Engine Type	4-Cycle
Cutting Height	1.25 - 3.75 inches
Fuel Capacity	1.0 qt (0.95 L)
Wheel Size	Front: 8 in (20.3 cm) / Rear: 8 in (20.3 cm) or 11 in (27.9 cm)