Snapper 2 Series - Page 3

FAMILIARIZATION
SEAT ADJUSTMENT
KNOB (Not Shown)
ACCESS COVER
(NOT SHOWN)
ROLL-
RELEASE
ROD
(NOT SHOWN)
GROUND SPEED
CONTROL LEVER
MOWER
BLADE
CONTROL
LEVER
REAR TIRES
(10PSI)
-IMPLEMENT
LIFT LEVER
LIFT LEVER
RELEASE BUTTON
CONTROL PANEL
(SEE FIGURE 2)
FUEL TANK & BATTERY
(UNDER HOOD)
NEUTRAL RETURN/BRAKE PEDAL
(NOT SHOWN)
TILTING
HOOD
DEFLECTOR
CHUTE
MOWER
DECK
FRONT TIRES ■
(12 PSI)
ENGINE COMPONENTS
NOT SHOWN:
•AIR CLEANER
• MUFFLER
•SPARK PLUG
• FUEL FILTER
FIGURE 1
INTRODUCTION
This manual has been prepared for the operators of the
SNAPPER LTH Series HYDRO LAWN TRACTOR.
Its purpose, aside from recommending operating and routine
service requirements, is to promote safety through the use of
accepted operating practices. READ, UNDERSTAND AND
FOLLOW the SAFETY PRECAUTIONS on Page 2 of this
manual and all safety messages on the tractor and
attachments before operating the machine.
NOMENCLATURE
The nomenclature drawing above (Figure 1) shows the
essential parts of the SNAPPER LTH Series HYDRO
LAWN TRACTOR. It is recommended that all operators
of this equipment become thoroughly familiar with the
controls, parts and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference.
3