Snapper CDM-8915 - Stopwatch; World Clock

TOOLS TOOLS
C
H
4
75
C
H
4
74
1
Press [MENU] .
2
3
Simultaneously times up to six different events. To operate the
stopwatch:
STOPWATCH
To measure a time period.
1. To start the stop watch, press [START].
2. To pause it, press [STOP].
3. To resume it, press . To reset it, press
[RESET]. To return to the previous page,
press .
To time up to six events at once:
1. To start, press [START].
2. To stop a time period and continue
measuring another one, press [CONT].
3. To stop the second and continue measuring
a third one, press [CONT].
4. To measure up to six time periods, repeat the
above steps.
5. To stop the stop watch, press [STOP].
6. To review the results, press [VIEW].
7. To return to the stop watch, press [OK].
8. To reset it, press [RESET].
1
Press [MENU] .
To display the time and date in pre-programmed cities:
WORLD CLOCK
2
Select a city.
3
The world map appears with the city, its date
and time.
4
To return to the previous page, press [OK].
Use the Navigation Key to select another city.
Since Daylight Savings Time (DST) is not applied, the actual time
during DST may be different.