Snapper SW20 Series User Manual

21
Regular Maintenance
Maintenance Schedule
The following schedule should be followed for normal care of your mower and mower deck. You will need to keep a record of
your operating time. Determining operating time is easily accomplished by observing the elapsed time recorded by the hour
meter.
Safety Items Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 200
Hours
Spring &
Fall
Check Safety Interlock System
••
Check Mower Brakes
••
Check Mower Blade Stopping Time
••
Mower Maintenance Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 200
Hours
Spring &
Fall
Check Unit for Loose Hardware
••
Clean Deck & Check / Replace Mower Blades**
•
Lubricate Mower & Mower Deck **
•
Check Tire Pressure
•
Check Hydraulic Oil
••
Change Hydraulic Oil Filter **
•
Engine Maintenance Before
Each
Use
Every 5
Hours
Every 25
Hours
Every 100
Hours
Every 200
Hours
Spring &
Fall
Check Engine Oil Level
•
Check / Clean Cooling Fins & Intake **
•
Service Air Filter *
•
Change Oil & Filter *
•
Check / Replace Spark Plugs *
•
Check / Replace Fuel Filter *
•
Inspect / Clean Spark Arrester*** Every 50 Hours
* Refer to engine owner’s manual. Change original engine oil after initial break-in period.
** More often in hot (over 85° F: 30° C) weather or dusty operating conditions.
*** If equipped, replace if damaged.
Regular Maintenance
Not for
Reproduction

Snapper SW20 Series Specifications

General

Brand	Snapper
Model	SW20 Series
Category	Lawn Mower
Language	English