Snapper SZ2654

ENGINE
Manufacturer Kohler
Type 7000 Series
Power 26 HP
1)
Spark Plug
Champion XC12YC
Gap: .030"(0,76 mm)
Lubrication Pressure with oil lter
Fuel Min 87 octane unleaded (Max ethanol 10%, Max MTBE 15%)
Fuel tank capacity 3-1/2 gallons 13,25 litres
Cooling Air cooled
Air lter Standard
Alternator 15 amp
Starter Electric
TRANSMISSION
Transmission Hydro-Gear ZT-2200 (EZT)
Steering control Dual levers, foam gripped
Speed forward 0-6.5 mph 0-10,5 km/h
Speed reverse 0-3.5 mph 0-5,6 km/h
Brakes Mechanical Park Brake
Front caster tires 11 x 6-5
Rear tires, turf pneumatic 18 x 9.5-8
Tire pressure 15 PSI / 103 kPa / 1 bar
FRAME
Cutting Width 54" 137 cm
Cutting Height 1-1/2 - 4" 3,8 cm - 10,2 cm
Number of Blades 3
Blade Length 18-1/4" 46,4 cm
Anti-scalp Rollers 6 adjustable
Sprung Seat Standard
Hinged Arm Rests Optional
Service Meter Digital
Blade Engagement Ogura Clutch
Deck Construction 10 gauge fabricated
Productivity 2.8 acres/h 11,331 m2/h
DIMENSIONS
Weight 640 lbs 290 kg
Base Machine Length 75" 191 cm
Base Machine Height 40" 102 cm
Base Machine Width 43-3/4" 111 cm
Overall Width, Chute Up 57" 145 cm
Overall Width, Chute Down
67-1/2" 171 cm
1)
The power rating as declared
by the engine manufacturer
is the average gross power
output at the specied
RPM of a typical production
engine for the engine
model measured using
SAE Standards for engine
gross power. Refer to the
engine manufacturer engine
specications.
32
TECHNICAL DATA