Sno-Way 22SKD Series - Introduction

2
This manual was written for the assembly, installation and
maintenance of your new Sno-Way Skid Steer Straight
Plow. Most importantly, this manual provides an operating
plan for safe use. Refer to the Table of Contents for an
outline of this manual.
Please keep this manual with your machine at all times as
reference material and so it can be passed on to the next
owner if the machine is sold.
We require that you read and understand the contents of
this manual COMPLETELY, especially the chapter on
SAFETY, before attempting any procedure contained in
this manual.
The Society of Automotive Engineers has adopted
this SAFETY ALERT SYMBOL to pinpoint character-
istics that, if NOT carefully followed, can create a
safety hazard. When you see this symbol in this man-
ual or on the machine itself, BE ALERT!, your per-
sonal safety and the safety of others, is involved.
• Defined in the next column, are the SAFETY ALERT
messages and how they will appear in this manual.
NOTE: Additional information concerning the equipment
or the procedure that may or may not be contained else-
where in this manual.
BE AWARE! It is illegal to remove, deface or other-
wise alter the safety decals mounted on this equip-
ment.
Record the A-Frame Serial Number, Blade Model Number
and Blade Serial Number in the space provided below as
a handy record for quick reference. The Blade Serial
Number is located on one of the middle ribs of the blade.
These plates contain information that your Dealer needs
to answer questions or to order replacement parts, if
needed, for your unit.
We reserve the right to make changes or improve the
design or construction of any part(s) without incurring the
obligation to install such parts or make any changes on
any unit previously delivered.
REMEMBER after the snow plow is installed on the
vehicle, the Pre-Delivery Check List and Delivery
Check List (on the outside back cover of this manual)
must be completed.
WARNING
FAILURE TO FOLLOW CAN RESULT IN INJURY
OR DEATH.
CAUTION
Information, that if not carefully followed, can
cause minor injury or damage to equipment!
DEALER
NAME
PHONE ( ) –
ADDRESS
CITY STATE ZIP
(FILL IN
)
ORIGINAL PURCHASER
NAME
PHONE ( ) –
ADDRESS
CITY STATE ZIP
(FILL IN
)
NAME PLATE DATA
BLADE SERIAL NUMBER
(FILL IN
)
A-FRAME SERIAL NUMBER
BLADE MODEL NUMBER
(Located on Blade Frame)
INTRODUCTION