Page 2 - 8 SL26/30SL
LIFT OVERLOAD ALARM
If a load equivalent to 100% of safe working load is lifted, the overload LED’s on the platform and
ground control box will illuminate. However, If a load which is greater than the safe working load is
placed on the platform, all machine functions will cease to operate and a warning alarm will sound.
To operate the machine, a load equal to or less than the safe working load must be placed on the
platform. To re-start the machine functions, push down the emergency stop button to re-set and then
release it to restore power.
!
D A N G E R
!
Never operate the machine with a platform load greater than the rated
capacity.
SPECIAL LIMITATIONS
To Next Page
Loading...
Need help?
General
