2. Delete to one card :
Deletion of user’s card (such as loss card),
card number is the 8 digits code indicated on the proximity card.
In the above operation if “
＊
” is being activated, the setting
modes will be terminated, provided that there isn’t any key
being entered. But, if there is any key-in being done earlier,
then, this operation will be the deletion to it.
P. 5
ＤＥＬＥＴＥ ＯＮＥ ＣＡＲＤ
ＡＣＣＥＳＳ ＤＥＮＩＥＤ
ＤＥＬＥＴＥ ＯＮＥ ＣＡＲＤ
ˍˍˍˍˍˍˍˍˍ
PRESS
2
1 BEEP SOUND
ENTER THE LOST CARD
8-DIGITS NUMBER
ENTER
“# ” SYSTEM
PASSWORD “# ”
STATUS LIGHT ON
WITH A BEEP SOUND
ＳＹＳＴＥＭ ＦＵＮＣＴＩＯＮＳ
ＳＥＬＥＣＴＩＯＮ：
WILL BE SHOWN
ON SCREEN
WILL BE SHOWN
ON SCREEN
3 BEEP
SOUND
DELETION
SUCCESSFUL
DELETION
UNSUCCESSFUL
(REPEAT REGISTRATION)
WILL BE SHOWN
ON SCREEN
PRESS ＊
TERMINATE
To Next Page
Loading...