Socket 7 Series - Page 7

BASIC MODE (HID)
Android: Connect Android Device in Basic Mode (HID)
1. Power on t he CHS. Make sure t he CHS is discoverable (unpaired).
2. Touch Home
| Menu | Settings | Wireless & Networks | Bluetooth
settings
3. Make sure t he device has Bluet oot h “ On” . Scan for devices.
4. In t he list of f ound devices, select Socket CHS [xxxxxx]. Tap Pair.
5. The CHS will connect t o t he Android device.
6. The CHS will beep once af t er it has connect ed and is ready t o scan bar-
codes.
*Apple: Connect Apple iOS Device or Mac OS Device Basic Mode (HID)
In t his mode t he scanner works and behaves j ust like a keyboard.
Therefore, CHS will work wit h Safari, Not es, and any ot her applicat ions t hat
support s an act ive cursor.
1. Power on t he CHS. Make sure t he CHS is discoverable (unpaired).
2. St art a Bluet oot h device search.
• iOS: Tap Settings | General | Bluetooth. Turn on Bluet oot h. A
Bluet oot h device search will begin.
• Mac OS: Click Syst em Pref erences | Int ernet & Wireless |
Bluet oot h. In Bluet oot h pref erences, select t he On checkbox. Click Set up
New Device. . . A Bluet oot h device search will begin.
3. In t he device list , t ap on CHS [ xxxxxx]. Tap Pair.
4. The CHS will connect t o t he Apple device.
5. The CHS will beep once af t er it has connect ed and is ready t o scan
barcodes.
*For Apple iOS Keyboard (only for Basic Mode)
• To enable/ disable keyboard pop-up f eat ure, double t ap (press) t he power
but t on.
Windows: Connect Windows PC
Power on t he CHS. Make sure t he CHS is discoverable (unpaired).
1. Use your comput er’s Bluet oot h Set t ings t o connect t o t he CHS.
2. Open Devices and Print ers and select “ Add a device” .
3. In t he device list , select Socket CHS [ xxxxxx]. Click Next .
4. If a passkey is request ed, ent er 0000 (four zeroes). Click OK.
Or Pair Now.
5. Follow t he remaining screens t o complet e t he wizard.
Note: On some computers the CHS will have to be congured as
Basic Mode (HID) Peripherals (see next page).
7