Windows: Connect Windows PC as a HID Peripheral
1. Power on t he CHS and scan t his barcode. The CHS will beep 3 t imes.
2. Turn on Bluet oot h on your PDA or PC and st art a device search.
3. Select Socket CHS. If prompt ed f or a passkey, ent er 0000 (f our zeroes). If
prompt ed t o select services, select Input Device.
4. Aft er t he CHS connect s and is ready t o scan barcodes, it will beep once.
Now you are ready to scan barcodes!
To connect to a new device, you must rst unpair the CHS See page 12.
WINDOWS HID (PERIPHERALS) MODE
8
To Next Page
Loading...
