Socket CHS Series 7 - Charging the Scanner

CHAPTER 2: SCANNER SETUP 13
CHARGING THE SCANNER
The CHS must be fully charged before first use. Use the AC adapter to charge from a
wall outlet, or the USB cable to charge from a PC. Initial charging takes about 5 hours
with an AC adapter. Optional charging accessories are also available.
The LED will be solid red while charging and green when the batteries are full.
If you use the USB cable and the PC enters suspend mode, charging will stop.
Included Charging
Hardware
• AC adapter with international plugs
• USB A Male to DC Plug Cable (2A maximum)
AC Adapter Rating
5V, 2A, positive pole center
Power Jack Connector
4 mm barrel
Optional Charging
Hardware
• Charging cradle
• Car charger
• Mobile Power Pack (available in Americas/Asia Pac)
• AC or DC adapter from Socket SoMo 650
Purchase online at: http://ww1.socketmobile.com/products/bluetooth-
scanners/accessories-bt.aspx