100
APPENDIX E
C
OMMAND BARCODES FOR CHS 7C, 7CI
Scan command barcode(s) to quickly configure the Socket Bluetooth Cordless Hand Scanner 7C, 7Ci.
By default, the CHS 7C, 7Ci is in HID mode as a Keyboard device.
IMPORTANT!
• Make sure the CHS is not connected to computer / device before scanning a command barcode!
• Print out the page to scan the barcodes. Do not scan them onscreen.
For command barcodes that enable / disable symbologies, please seethe Command Barcodes Sheet for CHS 7C, 7Ci
on the CD or online at: http://www.socketmobile.com/support/downloads
For command barcodes for the CHS 7E, 7M or 7P, please see Appendix F
.
The CHS can only be paired with one device at a time. To use the CHS with a different device, see Appendix G for
unpairing instructions.
Command Barcodes for CHS 7C, 7Ci in HID Mode
These command barcodes can be scanned with a CHS 7C / 7Ci in HID mode. Some will not work for a CHS 7C / 7Ci in SPP
mode. If you do not know which mode your CHS is in, scan the command barcode for HID Mode to make sure it is in HID
mode. If you have a CHS 7C / 7Ci in SPP mode, see page 103
for relevant command barcodes.
Bluetooth Connection Modes
SPP Mode
Changes the CHS to Serial Port Profile (SPP) mode.
Required for BlackBerry, optional for Windows and Android.
HID-Peripheral
Changes a CHS in HID-Keyboard mode to HID-Peripheral mode.
Optional for Windows and Android.
HID-Keyboard (default)
Changes a CHS in HID-Peripheral mode to HID-Keyboard mode.
Required for Mac OS and Nokia E71, optional for Apple iOS.
iOS Mode
Changes a CHS 7Ci to iOS mode.
Required for Apple iOS applications developed with SocketScan 10 SDK.
To Next Page
Loading...
