Socket S700 - Parameter Event Reporting Options; Enable;Disable Parameter Event Reporting

Socket User Manual (V 1.2) 2017/11/06
44
 Parameter Event (F0h 03h)
When enabled, the decoder sends a message to the host when events occurs. When disabled, no message is
sent.
R : 00 00 06 C7 04 00 F0 03 S1 S2
W : 00 00 08 C6 04 00 FF F0 03 01 S1 S2
*Enable
W : 00 00 08 C6 04 00 FF F0 03 00 S1 S2
Disable
 For Triple Setting use
Cancel