12
4 Installation
！ Caution
Environment of installation place
z Select a place where the machine and PC equipment will not be exposed to direct
sunlight or spray of chips, water, oil, etc. from other machines.
Ambient temperature “0-40℃”
Humidity shall be “75% or less” without dewing.
z Where protected from a transmission of big vibration.
z Where the installation foundation is sufficiently rigid.
z The machine shall be installed avoiding dust and mist as mush as possible.
！ Caution
Installation of the safety device
z Before operating the machine, the setter must fence the operating range.
a=4500mm, b=1500mm
To Next Page
Loading...