17
the power switch” at the primary power supply, etc. on the control boards of related
equipment in order at prevent power being turned on inadvertently by a third person during
maintenance or inspection.
Unexpected electrical shock or injury could result.
Don’t connect or disconnect wires, printed circuit board, connectors, etc. While they are
live.
There is a risk of electrical shock, breakage or malfunction.
When an alarm has occurred, check and remove the cause of trouble and confirm the safety
before resetting the alarm.
There is a risk of malfunction.
When a maintenance or inspection has been completed, confirm that all lock bolts are
tightened securely, no tools, etc. are left over and doors and covers of control board and
machine are closed properly.
Negligence of the precaution could result in an electrical shock, fire, injury or malfunction.
Regarding the machine sequence, when the sequence is installed by the customer, we are
not liable for responsibility to any breakage, trouble or damage caused by the sequence.
To Next Page
Loading...