7
！ Danger
Make sure to connect safety devices provided by the customer to the terminals for safety
devices. Machine will not start unless they are connected properly.
(When the customer cannot provide, we can install them.)
Please note that, when the input of safety device is modified or disabled by the
customer, we are not liable to the responsibility for an accident resulted from such
modification or disobedience.
Installation standard of safety device
1. Don’t step in the operating range of machine while the machine is operating (when
the operating power is turned on).
Determine and fence the operating range before installing the machine.
Determination of the operating range is necessary to ensure the security of safety
and for the maintenance.
The operating range should be given an abundant allowance considering the size
of workpiece being handled by the customer in addition to the operating range
inherent to the machine itself.
Note: a=4500mm, b=1500mm
To Next Page
Loading...