SOCOMEC - Réf.: 678 623 G GB 5
ENGLISH
Option 9:
• Top Cable Entry. For cables to be
routed through the top rather than
bottom. Option code is TICT.
Option 6:
• Auxiliary contacts for switch posi-
tion information, padlocking and
Auto/Manual mode information are
optionally available. Option code is
TAUX.
INTRODUCTION (continued)
OPTIONS AVAILABILITY
Factory options are delivered pre-installed in the enclosures
Option 5:
• A switch allowing 277Vac specific
voltage option for customers requi-
ring voltage code V601 (480/277 Vac).
Option code is THVM.
Option 1:
• A metering module allowing standard
features + current and power meter-
ing facilities on a larger backlit display.
This option also integrates option 6
(TAUX). Option code is TMET & TAUX.
Option 7:
• 2IN/2OUT.1 plug in module allowing
auxiliary contacts for Main and
Generator available information is also
available as an option. Option code is
TIO2.
Option 8:
• 1 plug in communication module,
JBUS/MODBUS protocole, can
optionally be ordered allowing remote
communication of the changeover
system. Option code is TCOM.
Option 2:
• IP54 protection rating is available as
an option. A specific protection win-
dow must be installed on the front
panel of the enclosure to avoid water
infiltration in the enclosure. Option
code is TIP5.
Option 3:
• Solid neutral link is available as an
option on the switch itself, when
switching of the neutral cable is not
required. Option code is TLNK.
Option 4:
• Lightning protection is also available
as an option to avoid ATS damage in
case of a strike on the power cables.
This option is highly recommended
in stormy areas. Option code is TLPR
and TI02 is included.
Loose options are available, for customer mounting in the enclosures
To Next Page
Loading...
Need help?
General
