Why does Socomec Controller display 'Max operation per minutes reached'?
If the Socomec Controller performs 10 operations in under 1 minute, the mode will remain the same. The controller will not perform or allow any operation during a set time. This is automatically cleared after 1 minute, which is configurable through software, and the value is dynamic.
What to do if there is an unexpected transfer on socomec ATyS C65?
If the Socomec Controller receives unexpected feedback from the switch without sending an order or experiences a loss of feedback from the current position, the mode will remain the same. This can be cleared through the display or the RST - Reset Fault input.
What to do if Socomec Controller failed to transfer?
If the Socomec Controller fails to reach the position after sending an order, or loses feedback from the new source after sending a transfer command, the mode will remain the same and the controller will start retries. The fault is automatically cleared if the requested position is reached, or it can be cleared via the display or the RST - Reset Fault input.
What does external fault mean on socomec ATyS C65?
If an input selected as FTE - External Fault becomes active on the Socomec Controller, the switch will immediately go to position 0 / center-off without timers, and the mode is set to Partial Inhibit (genset starts if needed). To resolve this, ensure the input is no longer active and perform a reset by user via the RST - Reset Fault input or through the display.
What happens if max password attempts reached on socomec ATyS C65?
If a user exceeds the allowed number of password attempts on the Socomec Controller, the mode remains the same. You will not be able to enter any password during a set time. This restriction is automatically lifted after the set timeout in the maintenance mode.
Why does socomec ATyS C65 Controller show 'Unknown position'?
If the Socomec Controller loses switch position input without an order being given, or there is no position feedback after a transfer starts, the mode will remain the same. The issue is automatically cleared if any position becomes active.
General| Brand | socomec |
|---|---|
| Model | ATyS C65 |
| Category | Controller |
| Language | English |
General safety precautions, standards compliance, and risk classifications.
Physical dimensions and steps for mounting the controller on an enclosure door.
Overview of the controller's various connectors for wiring.
Default setup for inputs and outputs, and configuration changes for RTSE technology.
Guide to the initial configuration wizard for language, date, and source settings.
Selecting switch technology, application type, and source logic for operation.
Summary of HMI buttons and detailed explanation of Manual and Automatic operation modes.
How to perform TEST ON LOAD and TEST OFF LOAD operations.
Details on commands like Mode/Position, Genset control, and Test operations.
Settings for configuring genset exerciser programs, including test type, periodicity, and duration.
How to configure parameters directly on the controller's display.
Configuring network parameters like voltage, frequency, and phase rotation.
Selecting switch technology, application type, and source logic for operation.
Configuring operating range limits for sources and parameters like retry and pulse length.
Configuring load type, CT positions, and primary/secondary transformer ratios.
Setting screen parameters like language, intensity, timeout, and date/time.
Configuring LED functions, HMI button options, and product name.
Setting operational timers for failures, returns, and genset functions.
Configuring timers for on-load, off-load, and external tests. Specific functions timers.
Configuring internal and external inputs/outputs and detecting I/O modules.
Configuring alarm thresholds, acknowledgment, output type, and criticality.
Explains user access levels and default passwords for controller security.
Configuring manual retransfer and in-phase transfer features for C65.
Using EasyConfig software for controller configuration and downloading the manual.
Detailed fault descriptions, causes, actions, and how to clear faults.
Configuring network auto-detection, setup, application, and load status.
Configuration for operation timers, genset timers, and test timers.
Configuring inputs, outputs, and communication parameters like Modbus and Digiware.
Configuration for measure, maintenance, combination, logical, and system alarms.
Configuring specific functions like manual retransfer, load shedding, cycler, and tripping actions.
To Next Page
