socomec ATyS Series User Manual

31
EN

7.2.3. ATy
7.2.3.1. Terminal denomination, description and characteristics.
All pressure on the connector
pins is to be avoided during

 
 
 
 
 
 
 
 
 
 
 
 


  Description Characteristics 
Cable Section

Outputs
 




 
 
 
 

is operational. (No Fault powered and ready to
changeover)


Contact
Included with
2000A to 3200A
Optional for
800A to 1600A
 




 
 
 
 
 
Power supply
Input
 




 
Control Inputs  







 
input forcing the product to remote control mode

 
 
 
 y

CAUTION
Do not connect terminals 312 to 317 to any power supply. These order inputs are
powered through terminal 317 and external dry contacts ONLY.

socomec ATyS Series Specifications

General

Type	Automatic Transfer Switch (ATS)
Transfer Mode	Open or closed transition
Control	Automatic, Manual, Remote
Standards	IEC 60947-6-1
Communication	Modbus, Ethernet
Protection Degree	IP20
Poles	3 or 4 poles