socomec COUNTIS E48 - 9.1.1. Exploring the SETUP 2 Menu

14
EN
COUNTIS E47/E48 - 547224A - SOCOMEC
9.1.1. View all of the menu "SETUP 2"
In the SETUP 2 menu, press " " for 3 seconds to put the device into programming mode.
You can go to the different screens by pressing "
":
>3s
IP address 1
IP address 2
IP address 3
IP address 4
Netmask 1
Netmask 2
Netmask 3
Netmask 4
Gateway 1
Gateway 2
Gateway 3
Gateway 4
Reset partial energy to zero:
Ea+ partial (kWh) Tariff T1, T2, T3, T4
Ea+ partial (kWh)
Ea- partial (kWh) Tariff T1, T2, T3, T4
Ea- partial (kWh)
Eap partial (kVAh)
Er+ partial (kVarh)
Er- partial (kVarh)
Return to the rst menu screen, "SETUP 2"