socomec DELPHYS MX - Status Information; Status Indicators (S00-S63)

10
5.1. Overview
The construction of the equipment and choice of materials and components comply with all current laws, decrees, directives and
standards currently in force.
In particular, the equipment is fully compliant with all European Directives concerning CE marking.
2006/95/EC CouncilDirective2006/95/EC,dated16February2007,onthereconciliationoflegislationwithinMemberStates
regarding electrical material for use within specific voltage ranges.
2004/108/EC Council Directive 2004/108/EEC, dated 15 December 2004, on the harmonisation of legislation within Member
States regarding electromagnetic compatibility, in abrogation of directive 89/336/EEC.
5.2. Standards
5.2.1. Electromagnetic compatibility
Electromagnetic Compatibility Provisions (EMC)
EN62040-2. Electromagneticcompatibility(classC3standard-C2optional)
EN61000-2-2 Compatibilitylevelsforlow-frequencyconducteddisturbancesandsignallinginpubliclow-voltagepowersupply
systems
EN61000-4-2 Electrostaticdischargeimmunitytest,
EN61000-4-3 Radiatedradio-frequencyelectromagneticfieldimmunitytest,
EN61000-4-4 Electricalfasttransient/burstimmunitytest,
EN61000-4-5 Surgeimmunitytest,
EN61000-4-6 Immunitytoconducteddisturbances,inducedbyradio-frequencyfields.
EN55011classA Limitsandmethodsofmeasurementofradiodisturbancecharacteristicsofindustrial,scientificandmedical(ISM)
radio-frequency equipment.
5.2.2. Safety
GeneralandsafetyrequirementsforUPSusedinoperatoraccessareas
EN60950-1 Generalandsafetyrequirementsforequipmentusedinoperatoraccessareas
EN62040-1 GeneralandsafetyrequirementsforUPSusedinrestrictedaccesslocations
EN60439-1 Low-voltageswitchgearandcontrolgearassemblies-Part1:Type-testedandpartiallytype-testedassemblies,
EN50272-2 Safetyrequirementsforsecondarybatteriesandbatteryinstallations
EN60896-1 Stationarylead-acidbatteries.Generalrequirementsandmethodsoftest.Part1:Ventedtypes
EN60896-2 Stationarylead-acidbatteries.Generalrequirementsandmethodsoftest.Part1:Valve-regulatedtypes
EN60146 Semiconductorconvertors
EN60529 Degreesofprotectionprovidedbyenclosures
5.2.3. Type and performances
Performance requirements and methods of test
EN 62040-3 Uninterruptible power systems (UPS). Methods of specifying the performance and test requirements
5.3. System and installation guidelines
The regulations refer to the unit (UPS) to which the manufacturer must comply with. The UPS engineer adhere’s to current legislation
forthespecificelectricalsystem(e.g.EN60364).
5. REFERENCE STANDARDS AND DIRECTIVES