socomec DIRIS B-10 - Installing on a Cable with Clamping Collar

25
EN
DIRIS B 546 770 A - SOCOMEC
5.4.4. Installing on a cable with clamping collar
TE-18 TE-25 - > TE-55
2
3
1
TE-90
2
1
Removing clamps
I
NB: Use the clamps to install the TE-90 sensors on a cable with clamping collar.
Do NOT clamp or pull out NON-INSULATED conductors carrying DANGEROUS VOLTAGE which
BNTKCB@TRD@MDKDBSQHBRGNBJATQMNQ@QBk@RG
Ref. IEC 61010-2-032