socomec DIRIS B-30 - Installing te Solid-Core Sensors; Mounting Accessories; DIN Rail Mounting

21
EN
DIRIS B 546 770 A - SOCOMEC
The following guidelines for installation must be observed:
q L@WHLTLNENOSHNM@KLNCTKDRB@MADHMRS@KKDCNMSGD#(1(2Ű!
q One single temperature module (DIRIS O-it) may be used.
q One single RS485 communication module (DIRIS O-m) may be used and must always be positioned last during
installation
q3GD#(1(2Ű!@RRDLAKXVHSGHSRNOSHNM@KLNCTKDRLTRSADHMRS@KKDCNM@#(-Q@HKNQA@RDOK@SD
5.4. Installing TE solid-core sensors
5.4.1. Mounting accessories
The list of mounting accessories supplied with the sensors are listed below:
Reference Pitch
DIN rail and plate
mounting
DIN rail mounting Plate mounting Busbar mounting
4829 0500
4829 0501
TE-18 18 mm
x 1
4829 0502
TE-25 25 mm
x 2 x 4
4829 0503
TE-35 35 mm
x 2 x 4 x 2
4829 0504
TE-45 45 mm
x 2 x 4 x 2
4829 0505
TE-55 55 mm
x 2 x 4 x 2
4829 0506
TE-90 90 mm
x 2 x 6
5.4.2. DIN rail mounting
TE-18 -> TE-55