socomec DIRIS B-30 - Setup Alarms; Current;Voltage Compatibility; Incorrect Direction of Rotation (Three-Phase Network); Faulty Current Sensor

51
EN
DIRIS B 546 770 A - SOCOMEC
$W@LOKDNEBNMkFTQHMF@M@K@QLNM@CHFHS@KHMOTSUH@$@RX"NMkF
10.2. Setup alarms
(E@MHMRS@KK@SHNMDQQNQHRCDSDBSDCCTQHMFRDSTO@M@K@QLVHKKAD@TSNL@SHB@KKXFDMDQ@SDC
10.2.1. Current/voltage compatibility
q Alarm upon connection error between the current and the voltage
q1DPTHQDR@BDQS@HMKN@CKDUDKŰ/%@MC((M
10.2.2. Incorrect direction of rotation (three-phase network)
q K@QLTONMHCDMSHjB@SHNMNESGDHMBNQQDBSCHQDBSHNMNEOG@RDQNS@SHNMENQDW@LOKDHMRSD@CNE
10.2.3. Faulty current sensor
q Alarm for detecting the absence of a current sensor
10.3. Setting up alarms
3GDHMRS@KK@SHNM@K@QLR@QD@TSNL@SHB@KKXCDSDBSDC@MC@K@QLRTONMDUDMSR@QDBNMjFTQDCVHSGSGD$@RX"NMjF
software.
There are several ways of identifying the presence of an alarm:
10.3.1. ALARM LED on front
q Blinking: Setup alarm
q Fixed: Alarm upon event (takes priority if there is a commissioning alarm at the same time)
10.3.2. Activation of an output
q(E@MNTSOTSHROQDRDMSNMSGDOQNCTBSHSB@MAD@BSHU@SDCVGDM@M@K@QLHRCDSDBSDC
10.3.3. Activation of an input
q(E@MHMOTSHROQDRDMSSGD@K@QLB@MAD@BJMNVKDCFDCEQNLSGHRHMOTS BJMNVKDCFDLDMSNE@M@K@QLB@MNMKXAD
taken into account if the alarm is complete