38 EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
• Click on “Modify active conguration” (1), and then click on “Sources” (2):
1
2
• Click on the “AutoDetect” icon on the right bottom corner to detect and add SOCOMEC devices already
present in the D-50/D-70 display’s topology.
• Click on the “+” icon at the right bottom corner for manually adding products one at a time. Adding an
M-50/M-70 gateway or D-50/D-70 display will add the entire topology under that gateway or display.
• The various SOCOMEC devices that are supported by WEBVIEW-M are given in the following list:
To Next Page
Loading...
