socomec DIRIS Digiware D-70 - Page 43

43EN
DIRIS Digiware D-50 & D-70 - 548088B - SOCOMEC
• Email
This tab allows you to activate and congure email notications in case of alarms:
 Activation: enable/disable the SMTP email export function
 Host: enter the IP address or name of the SMTP server
 Port: enter the SMTP port
 Secured connection: enable or disable the secured connection (SMTPS)
 Activate Authentication: enable or disable the SMTP authentication. It is possible to activate the authentication,
even if the secured connection is disabled.
 User: enter the user name for the authentication
 Password: enter the password for the authentication
 Email sender address: email address used by the D-50/D-70 display to send emails
 Email destination address 1: email address #1 to which email notications will be sent
 Email destination address 2: email address #2 to which email notications will be sent
 Email destination address 3: email address #2 to which email notications will be sent
 Language: language in which emails are sent
 Criticality of alarms to send: choose to send “information” or “Non critical” or “Critical” alarms
 Maximum waiting time: Time to wait to receive the email notication after the alarm is triggered on a device.
This allows to limit the number of emails sent by the D-50/D-70 display, especially when the alarm repeatedly
changes state.