socomec DIRIS Digiware M-50 - Protocols Tab: Email Notification Setup

27EN
DIRIS Digiware M-50 & M-70 - 548751B - SOCOMEC
• Email
This tab allows you to activate and congure email notications in case of alarms:
o Activation: enable/disable the SMTP email export function
o Host: enter the IP address or name of the SMTP server
o Port: enter the SMTP port
o Secured connection: enable or disable the secured connection (SMTPS)
o Activate Authentication: enable or disable the SMTP authentication. It is possible to activate the
authentication, even if the secured connection is disabled.
o User: enter the user name for the authentication
o Password: enter the password for the authentication
o Email sender address: email address used by the M-50/M-70 gateway to send emails
o Email destination address 1: email address #1 to send email notications to
o Email destination address 2: email address #2 to send email notications to