socomec DIRIS Digiware U-10 User Manual

DIRIS Digiware
Measuring and monitoring system with
associated current sensors for electrical
installation
EN
INSTRUCT
I
ON
MANUAL
L1
L2
L3
N
www.socomec.com/
en/diris-digiware

socomec DIRIS Digiware U-10 Specifications

General

Installation	DIN rail mounting
Measurement Parameters	Voltage, Current, Power, Energy, Frequency, Harmonics
Accuracy	Class 1
Communication Protocols	Modbus RTU
Display	LCD
Power Supply	24 VDC

Summary

2. HAZARDS AND WARNINGS

2.1. Risk of electrocution, burns or explosion

Details risks associated with electrical hazards, including shock, burns, and explosions during operation.

2.2. Risk of damaging the device

Outlines precautions to prevent damage to the device during installation and operation.

5. INSTALLATION

5.1. Recommendations and safety

Provides essential safety recommendations and references for installation procedures.

5.2. DIRIS Digiware mounting

6. CONNECTION

6.1. DIRIS Digiware connection

Details the wiring and connection procedures for the DIRIS Digiware system modules.

6.2. Connecting the current sensors

Explains how to connect the various types of current sensors to the DIRIS Digiware modules.

6.3. Connecting to the electrical network and loads

9. COMMUNICATION

9.2. RS485 and Bus DIRIS Digiware rules

Details essential rules for connecting DIRIS Digiware devices using RS485 communication.

10. CONFIGURATION

10.1. Configuration using Easy Config

Outlines how to configure the system using the Easy Config software via different connection modes.

10.2. Configuration from the DIRIS Digiware D remote display

11. ALARMS

11.1. Alarms upon events

Describes how alarms are generated upon events, including electrical parameters and digital inputs.

11.2. System alarms

11.3. Setting up alarms

13. PERFORMANCE CLASSES

13.1. Specification of the characteristics

Details the performance classes and specifications for DIRIS Digiware and its associated sensors.

13.2. Evaluation of the power supply quality