Need help?Do you have a question about the socomec DIRIS Digiware D-40 and is the answer not in the manual?
General| Communication Protocols | Modbus RTU, Modbus TCP/IP |
|---|---|
| Display | LCD |
| Operating Temperature | -10°C to +55°C |
| Mounting | DIN rail |
| Measurement Type | Voltage, Current, Power, Energy |
| Number of Channels | 4 |
| Power Supply | 24 VDC |
| Accuracy | Class 1 |
| Voltage Range | Up to 690V |
Details on LED indicators for device operation and status.
Procedure for automatic Modbus address assignment for connected devices.
Overview of communication methods and protocols used by DIRIS Digiware.
Key rules for establishing RS485 communication and Digiware bus connections.
Reference tables for communication parameters and data.
Steps and modes for configuring devices via Easy Config software.
Process for device configuration using the DIRIS Digiware D remote display.
Setting up alarms triggered by electrical parameters, consumption, or input status.
Automatic alarms for installation errors like connection faults or sensor issues.
Methods for identifying and acknowledging alarms through LEDs, outputs, or inputs.
Mechanical, electrical, and measuring specifications for DIRIS Digiware modules.
Technical data and ranges for solid-core, split-core, and flexible current sensors.
Specifications for DIRIS display units, including mechanical and communication details.
Detailed performance class values for various electrical parameters and measurements.
Performance classes for power supply quality indicators like harmonics and voltage variations.
To Next Page
