socomec DIRIS Digiware C-31 User Manual

DIRIS Digiware
Measuring and monitoring system with
associated current sensors for electrical
installation
EN
INSTRUCT
I
ON
MANUAL
L1
L2
L3
N
www.socomec.com/
en/diris-digiware

socomec DIRIS Digiware C-31 Specifications

General

Accuracy	Class 0.5
Operating Temperature	-10°C to +55°C
Input Current	5 A
Measurement Parameters	Voltage, Current, Power, Energy, Frequency, Power Factor
Communication Protocols	Modbus RTU
Display	LCD
Power Supply	24 VDC
Mounting	DIN rail
Relative Humidity	5% to 95% non-condensing
Standards	IEC 61010-1

Summary

2. Hazards and Warnings

2.1. Risk of Electrocution, Burns, or Explosion

Discusses risks related to electrical hazards and general safety precautions.

2.2. Risk of Damaging the Device

Outlines precautions to prevent device damage during operation and installation.

2.3. Responsibility

Details user and manufacturer responsibilities for installation and use.

4.2. Associated Current Sensors

5. Installation

5.2. DIRIS Digiware Module Mounting

Guides on mounting DIRIS Digiware modules on DIN rails or backplates.

5.3. TE Solid-Core Sensor Installation

Instructions for installing TE series solid-core sensors using various methods.

5.4. TR Split-Core Sensor Installation

Guides on installing TR series split-core current sensors.

5.5. TF Flexible Sensor Installation

Instructions for mounting TF series flexible current sensors.

6. Connection

6.1. DIRIS Digiware Connection

Explains the general connection of DIRIS Digiware modules.

6.2. Connecting Current Sensors

Details how to connect current sensors to modules.

6.3. Connecting to Electrical Network and Loads

7. Digiware Bus

7.2. Power Supply Sizing

8. Status and Auto-Addressing

9. Communication

9.1. General Communication Information

9.2. RS485 and Digiware Bus Rules

9.2.1. Connection to C-31 Interface Module

9.2.3. Connection to D-40 Remote Display

10. Configuration

10.1. Configuration using Easy Config

Explains configuration using the Easy Config software.

10.1.2. Using Easy Config Software

Guides on using the Easy Config software for configuration.

10.2. Configuration via Remote Display

Details configuration via the DIRIS Digiware D remote display.

11. Alarms

11.1. Alarms Upon Events

11.2. System Alarms

11.3. Setting Up Alarms

13. Performance Classes