Why socomec ITY3-TW010B UPS displays no battery?
If your socomec UPS displays a 'No Battery' message, it indicates that the batteries are disconnected. Check that all batteries are properly connected.
What does input bad wiring mean on socomec UPS?
If your socomec UPS displays 'Input bad wiring,' it means the phase and neutral conductors at the input of the UPS system are reversed. Site Fault detection is disabled by default but can be enabled/disabled from the LCD settings menu. Reconnect all input wires correctly.
What to do if socomec ITY3-TW010B UPS shows output short circuit?
If your socomec UPS indicates an output short circuit, check the UPS output and the connected loads. Ensure the short circuit is removed before turning the UPS back on.
General| Frequency | 50/60 Hz |
|---|---|
| Protection Level | IP20 |
| Apparent Power | 10 kVA |
| Active Power | 9 kW |
| Form Factor | Tower |
| Input Voltage | 400 V |
| Output Voltage | 230 V |
| Phase | 3-phase |
| Battery Type | VRLA |
| Battery Runtime | Depends on load |
| Efficiency | Up to 96% |
| Operating Temperature | 0 to 40°C |
| Communication Interface | RS232, USB |
| Technology | Double conversion online |
Details precautions and responsibilities regarding personal safety when using the UPS.
Covers enclosure rating, electrical protection, installation environment, and storage conditions.
Describes the UPS graphical LCD display, its buttons, and LED bar status meanings.
Explains the meaning of each area and icon displayed on the UPS LCD screen.
Lists configurable user settings, available options, and default values for the UPS.
Provides instructions on physical installation, clearances, and connections to power and loads.
Step-by-step guide on how to power on the UPS from the mains supply.
Instructions for starting the UPS directly from its batteries.
Lists common problems, their possible causes, and recommended actions for resolution.
To Next Page