socomec NETYS RT 11000 VA User Manual (English)

Sara HallSep 7, 2025

What to do if my socomec UPS is in "Battery Mode" even with mains connected?

J
Justin JenkinsSep 7, 2025
If your Socomec UPS is running in battery mode despite a healthy mains connection, it could be due to several reasons: * The input voltage may not be registering at the UPS input. Check the input voltage connection. * The thermal-magnetic switch on the rear panel might have tripped. Reduce the load and reset the switch. * The input voltage could be too high, too low, or distorted. In this case, have the mains voltage checked by a qualified electrician.

Brand	socomec
Model	NETYS RT 11000 VA
Category	UPS
Language	English

Brand

socomec

Model

NETYS RT 11000 VA

Safety Standards

Important Safety Information

Manual should be kept safe and consulted for correct UPS unit use.

Symbol Descriptions

Explains the meaning of symbols found on the unit's labels and plates.

Storage and Installation Guidelines

Provides guidelines for storing and installing the UPS unit.

Installation Checklist

Lists essential checks and considerations for installing the UPS unit.

Electrical Requirements

Details the necessary electrical specifications and compliance for UPS installation.

Introduction to NETYS RT UPS

General Overview

Introduces the NETYS RT series UPS, its features, and efficiency.

Exterior and Dimensions

Provides visual diagrams and measurements of the UPS unit's exterior.

Package Contents

Lists all items included in the UPS package for user verification.

Operation Panel Overview

LED Indicators

Explains the function and meaning of the UPS's LED indicators.

Multi-function Buttons

Describes the functions of the UPS's multi-function buttons for operation.

LCD Display and Modes

Details the UPS's LCD display icons, definitions, and operating mode diagrams.

Rear Panel Connections and Interfaces

Communication and Control Ports

RS-232, USB, RS-485, REPO, Dry Contacts for monitoring and control.

Power and Battery Interfaces

AC Input, UPS Output, External Battery Connector for power management.

Expansion and System Ports

Smart Slot and Parallel Ports for optional cards and parallel operation.

Communication Interfaces

Communication Software & Solutions

Software and systems for UPS monitoring and shutdown management.

Data Communication Ports

Smart Slot, Parallel Ports, RS-232, RS-485, USB for system interaction.

Remote & Auxiliary Interfaces

REPO Port, Dry Contacts, WEB/SNMP Card for remote and external control.

Battery Extension Connectivity

External Battery Connector for increased backup time.

Installation Procedures

Rack Mounting

Instructions for installing the UPS in a rack using bracket ears.

Tower Mounting

Procedures for mounting the UPS in an upright tower position using stands.

Battery Replacement

Step-by-step guide for replacing the UPS batteries.

Connection and Wiring

UPS Connection Warnings

Important safety warnings and recommendations for connecting the UPS.

Input/Output Connection

Details on connecting the UPS input and output power.

Single Unit Wiring

Wiring diagram and steps for connecting a single UPS unit.

Parallel Units Wiring

Instructions for wiring multiple UPS units to run in parallel.

External Battery Pack Connection

Steps for connecting external battery packs to the UPS.

UPS Operation

Single Unit Start-up

Procedures for starting up a single UPS unit with AC input or batteries.

Single Unit Turn-off

Steps to safely turn off a single UPS unit.

Parallel Units Start-up

Procedures for starting up multiple UPS units in parallel.

Parallel Units Turn-off

Steps to safely turn off multiple UPS units running in parallel.

Operating Modes

Explains the different operating modes of the UPS system.

LCD Display and Settings

Main Menu Navigation

Guide to navigating the UPS's main menu for settings and configurations.

Measurement Menu

Displays UPS status readings like output, input, bypass, and battery information.

Setting Menu Options

Allows configuration of various UPS parameters like Output, Input, ECO Mode, etc.

Control Menu Commands

Provides commands for enabling specific UPS functions like bypass and charger control.

Maintenance Menu Access

Accesses UPS maintenance functions, event logs, and identification.

Optional Accessories

Optional External Battery Pack

Information on external battery packs, including safety, package, and installation.

Manual Bypass Guide

Instructions for installing and using the manual bypass for UPS applications.

Lithium-ion Battery Module

Details on the lithium-ion battery module, its introduction, safety, and installation.

Maintenance Procedures

UPS Cleaning and Inspection

Guidelines for cleaning and regular inspection of the UPS unit.

Battery Maintenance

Recommendations for battery maintenance to ensure a normal lifetime.

Fan Checks

Advice on checking UPS fans for proper operation and ventilation.

socomec NETYS RT 11000 VA User Manual

Table of Contents

Questions and Answers:

socomec NETYS RT 11000 VA Specifications

Summary

Warranty Certificate and Conditions