SOFAR 25~50KTLX-G3 User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd.
cable)
Copper cable cross section area
(
mm
2
)
Step 1:
Figure 5-2 Recommend DC cable size
Step1: Find the metal contact pins in the accessories bag, connect the cable
according below diagram (1.Positive cable, 2. negative cable);
Figure 4-10 DC cable connection(1)
Step 2: Crimp the PV metal contact pin to the striped cable using a proper crimping
pliers;
Figure 4-11 DC cable connection(2)
Step 3: Insert wire into the connector cap nut and assemble into the back of male
or female plug, When you heard a “click”, the pin tact assembly is seated correctly.
(3. Positive Connector, 4. negative connector);