Sofar solar SOFAR 7.5KTLM - 3. Installation; Installation notes; 3.1. Installation Process; 3.2. Checking Before Installation

SOFAR 7.5KTLM User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 11 -
3. Installation
Outlines of this chapter
This topic describes how to install the SOFAR 7.5KTLM .
Installation notes
3.1. Installation Process
Figure 3-1 Installation flowchart
3.2. Checking Before Installation
Checking Outer Packing Materials
Packing materials and components may be damaged during transportation.
Do NOT install the SOFAR 7.5KTLM on flammable material.
Do NOT install the SOFAR 7.5KTLM in an area used to store
Flammable or explosive material.
Danger
The enclosure and heat sink are very hot while the inverter is
working, therefore do NOT install the SOFAR 7.5KTLM in places
where you might touch them inadvertently.
Caution
Consider the weight of SOFAR
7.5KTLM
when transporting
and moving the inverters.
Choose an appropriate mounting position and surface.
Assign at least two persons to install the inverter.
Attention
Start
Check before
installation
Prepare installation
tools
Determine the
installation
Moving the
inverter
Install the rear
panel
Install the
inverter
End