SOFAR 7.5KTLM User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
3.6. Moving the SOFAR 7.5KTLM
This topic describes how to move the to the installation position Horizontally
SOFAR 7.5KTLM.
Step 1 Open the packaging, insert hands into the slots on both sides of the
inverter and hold the handles, as shown in Figure 3-6 and Figure 3-7.
Figure 3-6 Moving the inverter (1)
Figure 3-7 Moving the inverter (2)
Step 2 Lift the SOFAR 7.5KTLM from the packing case and move it to the
installation position.
To prevent device damage and personal injury, keep balance when
moving the inverter because the inverter is heavy.
Do not put the inverter with its wiring terminals contacting the
floor because the power ports and signal ports are not designed to
support the weight of the inverter. Place the inverter horizontally.
When placing the inverter on the floor, put foam or paper under the
inverter to protect its shell.
To Next Page
Loading...
