Sofar 7.5KTLM - Page 51

SOFAR 7.5KTLM User manual
Copyright © Shenzhen SOFARSOLAR Co., Ltd
- 47 -
inverter logic interface connection for details.
20. Set Power Ratio (The country is set at 10)
Set generation ratio.
(B) “Event List” Interface as below:
Event List is used to display the real-time event records, including the total
number of events and each specific ID No. and happening time. User can enter
Event List interface through main interface to check details of real-time event
records, Event will be listed by the happening time, and recent events will be listed
in the front. Please refer to below picture. Press “Back” and “Down” to turn the
page in standard interface, then enter into “2.Event List” interface.
2. Event List
1. Current event
2. History event
Fault information
01 ID04 06150825
( Display the event sequence number, event ID
number, and event occurrence time )
(C) “SystemInfo” Interface as below
3.SystemInfo
------Press “OK”
1.Inverter Type
8.Power Factor
2.Serial Number
9.Reflux Power
3.Soft Version
10.Safety Paras
4.Hard Version
11.MPPT Scan
5.Country
12.Power Ratio
6.Modbus Address
7.Input Mode
The user enters the main menu by pressing "Back", turns the page to select
menu contents, and presses "OK" to enter "3. SystemInfo". Turning the page up and
down can select the system information to view.
(D) Display Time
Press the "Back" button and "Up" button or "Down" key in the standard user
interface to enter into "4.System Time",then press "OK" button to display the
current system time.
(E) Software Update