Sofarsolar SOFAR 3KTLM-G3 - Installation of the Inverter

INSTALLATION
SOFAR 3 ... 6KTLM-G3 31
4.8 Installation of the inverter
1 Hold the wall bracket in the desired place and mark the three
holes. Put the wall bracket aside and drill the holes.
2 Insert the complete dowel into the hole vertically.
3 Fasten the rear panel to the wall using the three screws.
4 Place the inverter in the wall bracket. Secure the inverter to the
wall bracket using a M6 hexagon screw.
5 You can secure the inverter to the wall bracket using a lock.